Gate&Door catalogue
Nice – Automation systems for gates, garage doors, industrial doors and barrier gates
Download EN | PDF, 15.2 MB

GIRO FOR ROLLING SHUTTERS

Nice – Automation systems for awnings, blinds and rolling shutters

Nice Steel Rolling Shutter Automation Systems

GIRO

Motor

For balanced rolling shutters up to 170 kg and 340 kg.

Electromechanical gearmotor available both in reversible and irreversible version.

High performance: new irreversible twin-motor version with 800 W power and lifting force up to 340 Nm.

Unbeatably flexible use and less inventory to keep in stock: a single model that is designed to take a 76 mm rolling shutter shaft but can be easily adapted to take a 60 or 48 mm shaft, covering the full range of most commonly used sizes.

The outside diameter of the gear can be adapted from 200 mm to 220 or 240 mm, allowing installation on most rolling shutters.

Technologically innovative: the brake is built into the gearmotor and results in much smoother operation than the traditional solution.

For all markets: 230 and 120V versions available.

QUICK AND EASY INSTALLATION

During installation, the motor is supported on the shaft thanks to the practical guided coupling.Easy limit switch adjustment: automatic limit switch adjustment is achieved by simply operating the rolling shutter without any load, with the motor released, and then just fine-tuning the system manually.Simple system for releasing both motors at the same time.

Recommended control units: Mindy A01 and A02.

Work

1- Motor
2- Remote Control
3- Safety Bar
4- Photocell
5- Control Unit
6- Spiral Cable

RONDO

Rondo MotorFor balanced rolling doors up to 130 kg and 180 kg.

Electromechanical gearmotor available both in reversible and irreversible version.

Smart: the limit switch unit and wiring are protected by an elegant box; pre-wired capacitor.

Fast: easy and intuitive adjustment of the limit switches both during opening and closing.

Complete: supplied with 200 mm and 220 mm flange for 60 mm shafts, with 48 mm and 42 mm adaptors.

Easy to install: thanks to the guided connector, you don’t need to hold the motor while you secure it using just 3 screws.

Recommended control units: Mindy A01 and A02, – easy to use, complete and reliable,

featuring:

  • semi-automatic or automatic operation;
  • complete reverse run with photocell;
  • step-by-step operation;
  • programmable Step-by-step/Open input; • programmable Stop/Photo input;
  • input for resistive edge;
  • incorporated radio card, compatible with the Nice Flo, FloR and Smilo systems.


Click for Rolling Shutters & Automations…

Click for Window Shutters & Automations…

Click for Industrial Doors & Automations…

Click for Dealer Access…